Product manual
[product name] examination gloves[specification and model] XS, s, m, l, XL.
| Table 1 dimensions and tolerances | Unit: mm | |||
| Specifications | Nominal width | Minimum length | Minimum thickness | Maximum thickness |
| XS | ≤80 | 220 | Smooth area:0.08 Pockmarked area:0.11 | Smooth area:2.00 Pockmarked area:2.03 |
| S | 80±5 | 220 | ||
| M | 95±5 | 230 | ||
| L | 110±5 | 230 | ||
| XL | ≥110 | 230 | ||
Figure 1 position of width and length measurement Note: for gloves of different specifications, the position of 48mm ± 9mm is about the center of palm.
Figure 2 location of thickness measurement
[product performance]
1. Breaking force before aging ≥ 7.0n;
2. Elongation at break before aging ≥ 500%;
3. Breaking force after aging ≥ 7.0n;
4. Elongation at break after aging ≥ 400%;
5. The residual powder content on the surface of powder gloves shall not be more than 10mg / DM2. The residual powder content on the surface of powder free gloves is not more than
2.0mg/piece.
[main structure]
gloves are mainly made of NBR latex. According to the surface type, it can be divided into pitted, smooth, powdered
There are four kinds of powder free, and the surface of powder is treated with corn starch.
[scope of application]
It is used to wear on the doctor's hand or fingers to check or touch the patient's condition.
[contraindications]
It is forbidden for those allergic to NBR latex.
[precautions]
1. This product is disposable. Please destroy it after use.
2. Be careful when using nitrile gloves.
3. It is forbidden to use if the package is damaged.
4. This product is non sterile.
[instructions]
1. Select the gloves suitable for your hand size, open the package, and take a glove to lift with your left thumb, index finger and middle finger
Hold the opening of the hand sleeve, and quickly extend the right hand into the glove, so that the fingertips reach the top of the glove. Don't show your wrists.
2. Insert the left hand into the glove as above.
3. When removing the gloves, turn them upside down and gently remove them. Try not to touch the outside of the gloves.
[storage conditions]
It shall be stored in a room with relative humidity no more than 80%, no corrosive gas and good ventilation.
[transportation conditions] protect from sun and rain during transportation.
[production date] see the product label.
[expiration date] see the product label.
[service life] three years.
[explanation of graphics, symbols, abbreviations, etc. used in the label of medical devices]
: This product is used for one-time use.
: This product should be stored away from light.
: This product should be stored in rain proof condition.
:The suitable storage temperature of this product is 10 ºC to 30 ºC.
